The main performance characteristics:
1 Machine tool head box and bed, tailstock, Supporting plate, etc. the combination of surface between manual scraping, machine to undergo a rigorous inspection, effectively ensure the machine tool accuracy and stability.
2 Machine adopts high strength cast iron, copper and chromium special materials are added, the bed width 400mm, bed rail quenching depth up to 4mm, effectively improves the abradability and stability of the machine.
3 The machine tool bed head box lubrication uses the pump to carry on the circulation forced lubrication, in view of the south hot weather, has guaranteed the bed head box cleanliness and the heat radiation characteristic, has effectively extended the bearing and gear's service life.
4 Wafangdian Bearing is used in machine tool spindle, the spindle through hole diameter 80mm, machine tool gear with precision grinding, can effectively improve the hardness of the gears, to reduce noise of the machine.
5 Machine tool uses the domestic brand lead screw, the silk mother uses the high quality bronze alloy to guarantee the wear-resisting property and the precision maintenance.
6 The machine adopts high strength four station turret shank size: 25x25mm.
Application:
1 CA series ordinary horizontal lathe is used to turning internal and external cylindrical surface, conical surface, and other rotating surface, turning various metric and inch, modulus and pitch thread, and the pitch diameter of the thread and pull the drilling and oil tank etc., is general very strong horizontal lathe, Widely applicable batch processing of various shaft and disc parts.
2 The series lathe bed width in general lathe, 400mm rail width has higher stiffness, rail surface by intermediate frequency quenching, wear-resistant durable.
3 Handy machine operator concentration, slide plate is provided with a quick moving mechanism. Using single handle operation, humanization.
4 The rigidity of the machine tool structure and the transmission stiffness are higher than the general lathe, the power utilization rate is high, which is suitable for the strong cutting.
5 Before leaving the machine tool factory, the machine tool is tested strictly according to the inspection procedure, and the machine tool is tested to ensure that the machine tool has good stability and reliability.
Product Parameters
Product main technical parameters:
| Specification |
Models |
| CM6241×1000/1500 |
CM6241V×1000/1500 |
| Capacity |
|
| Swing over bed |
410mm(16") |
| Swing over cross slide |
255mm(10") |
| Swing in gap diameter |
580mm(23") |
| Length of gap |
190mm(7-1/2") |
| Admits between |
1000mm(40")/1500mm(60″) |
| Center height |
205(8″) |
| Width of bed |
250(10") |
| HEADSTOCK |
|
| Spindle nose |
D1-6 |
| Spindle bore |
52mm(2") |
| Taper of spindle bore |
No.6Morse |
| Range of spindle speed |
16 changes 45-1800r/min |
30-550r/min or 550-3000r/min |
| FEEDS AND THREADS |
|
| Compound rest travel |
140mm(5-1/2") |
| Cross slide travel |
210mm(8-1/4") |
| Lead screw thread |
4T.P.I. |
| Max.Section of tool (W×H) |
20×20mm(13/16") |
| Longitudinal feeds range |
0.05-1.7mm/rev(0.002"-0.067"/rev) |
| Cross feeds range |
0.025-0.85mm(0.001"-0.0335"/rev) |
| Threads metric pitches |
39kinds 0.2-14mm |
| Threads imperial pitches |
45kinds 2-72T.P.I |
| Threads diametral pitches |
21kinds 8-44D.P. |
| Threads module pitches |
18kinds 0.3-3.5M.P. |
| TAILSTOCK |
|
| Quill diameter |
50mm(2") |
| Quill travel |
120mm(4-3/4") |
| Quill taper |
No.4 Morse |
| Cross adjustment |
±13mm(±1/2") |
| MOTOR |
|
| Main motor power |
2.2/3.3kW(3/4.5HP)3PH |
| Coolant pump power |
0.1KW(1/8HP),3PH |
| DIMENSION AND WEIGHT |
|
| Overall dimension(L×W×H) |
194×85×132cm/244×85×132cm |
| Packing size(L×W×H) |
206×90×164cm/256×90×164cm |
| Net weight/Gross weight |
1160kg/1350kg 1340 kg /1565 kg |
Audited Supplier 
){kind=link}