1,This machine was Suitable for high-speed steel and hard alloy steel cutting tools to perform processes such as turning outer circles, end faces, slotting, cutting, boring, turning inner cones, and turning grooves on shaft parts, cylindrical and disc-shaped parts of different materials. The spindle adopts a three support structure, and the bed body adopts an integral bed body, which gives the bed body high rigidity. The machine tool is equipped with a separate oil pump, forced lubrication, slide plate, tool holder, saddle, and can move quickly. This machine tool has the characteristics of strong rigidity, high efficiency, safety and reliability, easy operation, and beautiful appearance.
2, The bed width of this series of lathes is 755 millimeters, with high rigidity, and the guide surface is quenched at medium frequency for durability and wear resistance. The machine tool operation is flexible and centralized, and the slide is equipped with a fast moving mechanism. Adopting a single handle for visual operation, with good user friendliness. The structural stiffness and transmission stiffness of the machine tool are higher than those of a general lathe, with high power utilization and suitable for strong cutting.
3, Before leaving the factory, the machine tool is strictly inspected according to the inspection procedure, and a strong cutting test is conducted to ensure that the machine tool has good accuracy stability and machining reliability.
| Specifciations |
Model |
| DL-5600 |
|
| Max. swing over bed (mm) |
1400mm |
|
| Max. swing over cross slide(mm) |
1030mm |
|
| Max. swing over gap (mm) |
1850 |
|
| Bed width (mm) |
755 |
| Max. workpiece length (mm) |
2000~10000 |
| Max. loading capacity (t) |
6 (10T) |
| Spindle model |
A15 |
| Spindle bore diameter (mm) |
130 |
| Spindle hole |
140# |
| spindle speed (r/min) |
3.15-315 (21) |
| spindle front bearing diameter (mm) |
200mm |
| longitudinal feeds range (r/min) |
0.1-12 56 |
| transversal feeds range (mm/r) |
0.05-6 56 |
| netric thread (mm) |
1-120 44 |
| inch thread |
3/8-28 / 31 |
| module thread (mm) |
0.5-60
45 |
| pitch thread |
1-56/ 25 |
| tailastock taper hole |
80 |
| tialstock travel(mm) |
300 |
| tailstock sleeve diameter (mm) |
160mm |
| main motor power(kw) |
22kW |
| rapid motor power(kw) |
1.5kW |
| coolant pump power (kw) |
0.125kW |
Audited Supplier 
){kind=link}